WATER BASE PAINT
Renner Italia manufactures a wide range of coatings paying particular attention to all aspects related to environment protection and safety of use, both in relation to the application process and as regards the conditions of the indoor places where the final coated items are installed. Moreover particular care is taken in order to avoid presence of even small traces of chemicals that may affect health and safety of people that may daily come in touch with the coated glasses.
All the coatings supplied to your esteemed company, namely
GO—M800/–NTR
GO—M800/–EXT
and all RAL and NCS colors derived from the above mentioned products are water-based, and therefore the only significant evaporation into atmosphere is actually made of water. Particular attention is taken in the formulation process in order to reduce to the minimal levels the addition of VOC generating substances.
All Renner coatings are manufactured under the stringent rules of European Reach regulation (Registration Evaluation Authorization of Chemicals) – EU regulation n. 1907/2006 REACH, and they are therefore in compliance with the strictest requirements of safety and reduced toxicity . They are totally free from hazardous materials classified as SVHC (Substance of Very High Concern), under the European regulations.
In addition to that, they are totally free from PAH (Poly-cyclic Aromatic Hydrocarbon. They also are based on selected raw materials that meet the requirements of the severe standards related to Safety of Toys, as specified by the European Norm EN.71.3 : 2013 – Safety of toys – which identifies the chemicals and the heavy metals that must not be present in order to ensure the health and safety of children, and whose presence may
cause potential risks (Aluminum, Antimony, Arsenic, Barium, Boron, Cadmium, Chrome – III and VI-, Cobalt, Copper, Lead, Manganese, Mercury, Nickel, Selenium, Strontium, Tin, Zinc).
As regards the presence of VOC (Volatile Organic Compound), they are kept to the minimum level technically achievable, as also mentioned before; such values are so low that they comply even with the strict regulations and limits related to the “on site” applications (DIY) by the European low, even though such products are meant for industrial use. But beside compliance with Norms and Regulations what is important to point out is that the use of Renner products contributes significantly to the reduction of environmental pollution and to the safety, air quality and wholesomeness of working and indoor environments.
HDMR
Before explaining anything about HDHMR, one should know the true meaning of this word. HDHMR stands for High Density High Moisture Resistance. It is basically an upgraded term of plywood, used to develop tough and robust wooden usage. Explaining the definition, HDHMR board is made by combining fiber chips, forest wood waste through a homogeneously construction process. These fiber chips are pressed together to form a single layer, removing small wood content to form a robust higher density board. These boards are mainly used where moisture and mould wooden boards are required like kitchen shutters, packing industry furniture, outdoor fixture, etc.
The first main attractive thing about HDHMR board we want to focus is, water resistance. As you can see in the name the term, High density is achieved through the combination of the hard wood particle board along with the special glue pressing technique. These hardwood particles when pressed through the glue, they form a unique water resistance layer through the board. Due to this feature, these boards will take over plywood in kitchen furniture soon and can be used as laminated flooring.
Due to pressing technique small unusable particle get removed from these boards, which makes them termite free too. In plywood making process some content of wood get stuck, which provide easy access to termites in terms of food; but if you are using HDHMR board than there is no need to worry about termites. Due to pressing technique of HDHMR board, several small fibers of wood combines till the time it required density is not achieved.
HDHMR board has a multi dimensional bond with single layer glue architecture, hence it provide higher moisture resistance compared to normal plywood. Where normal plywood catches moisture and there layers start to peel off, HDHMR board will not losses its strength.
Unlike block board, HDHMR boards are made with fiber chips and come with pre paint/polish surface. This feature helps them in veneer pasting along with smooth finish and glossy shine. The high gloss is again protested by water resistant feature.
HDHMR board is developed using homogeneously method, which add benefits of carved, mould and routed during the construction process. Because of the multidimensional bond the HDHMR boards comes with higher screw strength, sometime close to 10 times more than usual block board and plywood. Also when talking about the cost effectiveness, HDHMR take over on other wooden boards.
